|
 |
Image MASSter 4002i
-
Load 2 Hard drives at
speeds exceeding
1.94GB/Min.*
-
WipeOut 3 Hard drives at
speed exceeding
2.0GB/Min.*
-
Forensic audit printout
after Wipeout
-
Virtually no degradation
in speed adding drives.
-
Works with any IDE, EIDE,
or Ultra-DMA Hard
Drives.
-
Mix Different size and
model drives in the same
load.
-
Loads any operating
system and application
software including
Windows
95/98/NT/2000/XP, UNIX,
Linux and Mac OS.
-
Scalabilty of all
partitions.
-
Full verification and
error reporting: Zero
Defect Copies.
-
Automatic load size
detection.
-
Built in options:
NTFS-IQcopy, Wipeout
-
Support 3.3-volt hard
drives electrical
interface.
-
Easy Firmware
upgradeability.
-
Software Upgradeability
and saving log files
using PCMCIA Compact
Flash Memory Card.
-
Automatic cable test
before every run.
-
Can not upgrade this
unit into 4 or 8 drive
unit *(IM4004/IM4008).
48-Bit addressing for
drives > 137GB.
Ability to lock unit
setting with supervisor
password.
Ability to store
multiple, customized,
predefined setting
configurations.
Block map copy mode
included.
Database option
included.
|
|
Options for
Image MASSter 4002i: |
-
Network Option: Using
the Built in PCMCIA port
with PCMCIA net work
card ( maximum speed of
35 MB/Min).
-
Diagnostics Option:
Scan, Recover, and
Repair bad and "weak"
sectors(DriveER).
|
|
 |
Image MASSter 4004i
-
Load 4 Hard drives at
speeds exceeding 2
GB/Min.*
-
WipeOut 5 Hard drives at
speed exceeding 2.6
GB/Min.*
-
Forensic audit printout
after Wipeout
-
Virtually no degradation
in speed adding drives.
-
Works with any IDE, EIDE,
or Ultra-DMA Hard
Drives.
-
Mix Different size and
model drives in the same
load.
-
Loads any operating
system and application
software including
Windows
95/98/NT/2000/XP, UNIX,
Linux and Mac OS.
-
Scalabilty of all
partitions.
-
Full verification and
error reporting: Zero
Defect Copies.
-
Automatic load size
detection.
-
Built in options:
NTFS-IQcopy, Wipeout
-
Support 3.3-volt hard
drives electrical
interface.
-
Easy Firmware
upgradeability.
-
Software Upgradeability
and saving log files
using PCMCIA Compact
Flash Memory Card.
-
Automatic cable test
before every run.
-
Can not upgrade this
unit into 8 drive unit
*(IM4008).
48-Bit addressing for
drives > 137GB.
Ability to lock unit
setting with supervisor
password.
Ability to store
multiple, customized,
predefined setting
configurations.
Block map copy mode
included.
Database option
included.
|
|
Options for
Image MASSter 4004i: |
|
Options for
Image MASSter 4004i
(coming soon): |
-
Network Option: Using
the Built in PCMCIA port
with PCMCIA net work
card ( maximum speed of
35 MB/Min).
-
Diagnostics Option:
Scan, Recover, and
Repair bad and "weak"
sectors(DriveER).
|
|
 |
Image MASSter 4008i
-
Load 8 Hard drives at
speeds exceeding
1.90GB/Min.*
-
WipeOut 9 Hard drives at
speeds exceeding
2.0GB/Min.*
-
Forensic audit printout
after Wipeout
-
Virtually no degradation
in speed when adding
drives.
-
Works with any IDE, EIDE,
or Ultra-DMA Hard
Drives.
-
Mix Different size and
model drives in the same
load.
-
Loads any operating
system and application
software including
Windows
95/98/NT/2000/XP, UNIX,
Linux and Mac OS.
-
Scalabilty of all
partitions.
-
Full verification and
error reporting: Zero
Defect Copies.
-
Automatic load size
detection.
-
Built in options:
NTFS-IQcopy, Wipeout
-
Support 3.3-volt hard
drives electrical
interface.
-
Easy Firmware upgrading.
-
Software Upgrading and
saved log files using
PCMCIA Compact Flash
Memory Card.
-
Automatic cable test
before every run.
-
48-Bit addressing for
drives > 137GB.
-
Ability to lock unit
setting with supervisor
password.
-
Ability to store
multiple, customized,
predefined setting
configurations.
-
Block map copy mode
included.
-
Database option
included.
|
|
Options for
Image MASSter 4008i: |
|
Options for
Image MASSter 4008i
(coming soon): |
-
Network Option: Using
the Built in PCMCIA port
with PCMCIA net work
card ( maximum speed of
35 MB/Min).
-
Diagnostics Option:
Scan, Recover, and
Repair bad and "weak"
sectors(DriveER).
|
|
|
Image Masster-Wipe MASSter
-
WipeOut up to 9 Hard
drives at speeds
exceeding 2.6 (for one
pass) GB/Min.*
-
Conforms to U.S. Dept.
of Defense Standard DoD
5220.22-M.
-
Forensic audit printout
after Wipeout
-
Virtually no degradation
in speed when adding
drives.
-
Works with any IDE, EIDE,
or Ultra-DMA Hard
Drives.
-
Support 3.3-volt hard
drives electrical
interface.
-
Easy Firmware upgrading.
-
Software Upgrading and
saved log files using
PCMCIA Compact Flash
Memory Card.
-
Automatic cable test
before every run.
-
Ability to lock unit
setting with supervisor
password.
-
Ability to store
customized, predefined
setting configurations.
-
48-Bit support for
drives > 137GB.
-
Ability to unlock and
wipe HPA/DCO areas.**
-
Mix different size/type
drives on the same load.
**
Requires purchasing of the
appropriate
HPA
or
DCO
Option. |
|
Options: |
Host Protected Area (HPA)
Option:
The Image MASSter 4000IDE
family unit now supports
copying HPA configured
source drives when the HPA
option is installed. HPA is
defined as a reserved area
for data storage outside the
normal operating file
system. This area is hidden
from the operating system
and the file system, and is
normally used for
specialized applications.
Systems may wish to store
configuration data or to
save memory to the hard disk
drive device in a location
that the operating systems
cannot change. If an HPA
area exists on a source
drive, the Image MASSter
4000IDE family unit’s copy
operation will configure the
target hard disk drive with
a similar HPA area.
Device Configuration Overlay
(DCO) option:
The Image MASSter 4000IDE
family unit supports copying
DCO configured source drives
when the DCO option is
installed. DCO allows
systems to modify the
apparent features provided
by a hard disk drive device.
It provides a set of
commands that allow a
utility program to modify
some of the commands, modes,
and feature sets reported as
supported by the hard disk
drive. It can be used to
hide a portion of the hard
disk drives’ capacity from
being viewed by the
operating system and by the
file system. If DCO is
detected on the source
drive, the Image MASSter
4000IDE family unit’s copy
operation will configure the
target hard disk drive with
similar DCO settings.
Multi-MASSter option:
This option is a major
money-saver. It allows the
user to store multiple
software loads (up to 10) on
a single master hard drive.
This option works with DOS,
Windows 95, and NT
(FAT)-based software loads.
The Multi-MASSter option
eliminates numerous master
drives and excess drive
handling, saving time and
money. |
|
IDE Desktop accessories: |
|
|
 |
Image MASSter 4000IDE Family
2.5 Adapter UDMA set of 1
Image MASSter 4000IDE Family
2.5 Adapter UDMA set of
3
Image MASSter 4000IDE Family
2.5 Adapter UDMA set of
5 |
|
 |
Image MASSter 4000IDE Family
Padded Case Protect your
Image MASSter! We offer this
lightweight, durable
carrying case. The padded
case has extra pockets to
hold cables, software, and
master drives. Perfect for
the technician on the go! |
|
 |
Image MASSter 4008IDE Cable
Set
Include 9 external UDMA 8"
data cables and 9 external
8" power cables. |
 |
Image MASSter 4008IDE
Shelves Solution
This shelves product gives
the user of ImageMASSter
4008IDE alternative, and
more convenient solution to
attach the 9 drives to the
machine. It can accommodate
large hard drives(thicker
than standard hard drives)
and it easy to use! |
|
IDE desktop accessories: |
|
 |
PCMCIA SOLUTION KIT
Includes 1 master and two
2-drive PCMCIA Adapters for
the Image MASSter 2000. |
 |
PCMCIA SOLUTION KIT
Includes 1 master and 1
2-drive PCMCIA Adapters for
the Image MASSter 500i. |
 |
PCMCIA MASTER DRIVE UNIT.
Includes 1 master and 1
2-drive PCMCIA Adapters for
the Image MASSter 500i. |
 |
PCMCIA TWO DRIVE UNIT
Image MASSter PCMCIA
Two-Drive Unit |
