Site Map Contact Us Home

US Canada Toll Free: 1-866-357-4321

Head Office: 240-235-0602 |

info@solstice-inc.com

 
 
MT-G Digital Cinema Series HDD Duplicator
MT2100G / MT2600G
 
High performance up to 7.2 GB transfer speed per minutes.
FAT16/32/64, NTFS, Linux(Ext2/Ext3/Ext4), Mac(HFS, HFS+, HFSX.) supports systems & files copy.
Data Sanitization : quick erase, DoD erase, and secure Erase.
Open-platform Design supports multi-interface HDD/SSD.
Real-time PC monitoring
Log report management records all tasks details for better production management.
Cable –free connection for easier HDD insert & remove
 
 
Impeccable efficiency
 
With up to 7.2 GB/m transferring bandwidth, it is the greatest for Professional HDD/PC/NB Manufacturer. Each SATA interface is independent, no matter how many targets you would like to duplicate, speed stays the same and doesn’t decline. the 7.2 GB per minute is far beyond PC-based duplicators.
 
Whole HDD Copy
  Whole HDD Copy supports all kinds of partition formats.
 
Systems & Data Copy
 
This mode can identify the HDD formats of Windows (FAT16/32,64, NTFS), Linux(Ext2/Ext3/Ext4), Mac(HFS, HFS+, HFSX. It will only copy the data and system contained area, which enhances the copying efficiency very much.
 
4 ways of Sanitization:
 
Quick Erase Erase HDD index table, and only takes A FEW SECONDS to complete
Full Erase Erase the whole HDD content
DoD Erase Complies with the U.S. Department of Defense's standard of erasing.
 
Secure erase A National Institute of Standards and Technology 800-88 accept technique for properly purging hard drives. This method is supported by almost all modern SATA HDD.
 
Device Compatibility
 
Support GPT, MBR table format
Support Advanced format HDD, Up to 15TB above device
Supported OS: Linux, Unix, Windows, Macintosh, etc. are all supported.
 
Open Platform Design
 
Supports 3.5” HDD/SSD
Supports 2.5” HDD/SSD
 
Real-Time PC Monitoring
  It is absolutely perfect for MONITORING the work progress during operation. It shows all the information for EVERY PORT, which is a powerful tool for sorting out the lagging writing HDD and keeping the operation in most efficient. All the information you need will be shown on screen of PC.
   
 
   
 
1. It’s able to monitor duplication status from PC while duplicators are connected to it.
 
   
 
2. Shows and records the brand name, model, S/N, duplication time, result of every HDD from all the ports, the info of both sources HDD and target HDD are recorded.
 
   
 
3. Slow R/W speed HDD detection: lagging HDD can be easily sorted, because user can see the duplication speed of every port by “Event Log”.
 
   
 
4. To select a period of time in order to export part of the log data. Just one click, the data will be exported into .txt file and saved on PC. The date of export is the file name. (e.g. 20130308.txt)
 
 
Log Report Management
 
Records operation time, each port’s process details, including HDD’s model, capacity, S/N, result (pass, fail).
Real-Time recording and viewing Log Report via PC-Link
 
   
 
Log report .txt file can be generated via USB port and saved to USB device
 
   
 
It can save up to 130,000 piece of log. One instruction onto one HDD is recorded as one piece of log. (e.g. duplication from 1 HDD to 21 targets will be recorded to 21 pieces of log)
 
iSecuLog(Anti-Tampering Log Report)
  Any falsification can be detected to ensure report is genuine. You do not need to worry about Log Report is not genuine any more.
 
Auto power control system
 
When the duplicator stop executing any function, the machine willautomatically cut off the power of each port to protect the HDD from damage during removal from the duplicator. The power of each port will only be supplied when the operation is on.
 
Stand-alone operation
 
There are two modes of operation, stand-alone and PC-link operation. User can choose either mode to satisfy different need. Stand-alone is excellent in simplifying operation and very user-friendly (operating on four buttons of duplicator would complete all the jobs)
Model MT2100G MT2600G
Targets 1:20 1:25
Specification
Buffer 128MB
Maximum Speed
Supported
7.2 GB/min
Copy Format Supported All Partitions/ Whole HDD Copy: All Formats
Quick Copy: FAT16/32, exFAT, NTFS, Linux(Ext2/Ext3/Ext4), HFS/HFS+/HFSX
Operating Type Stand-alone
Real-time PC monitoring
Language Support English, Japanese
Display Monochrome LCD Display
Status LED LED(Red/Green/Yellow) on each slot
Control Button 4 push buttons(▲, ▼, OK, ESC)
Function
Copy Function Quick Copy
All Partitions Copy
Whole HDD Copy
Percentage Copy
Bad sector counting Yes
Support Bad-Sector Tolerance Yes
Compare Function Yes
Erase Function Quick erase, full erase, DoD erase, Secure Erase
Advanced Function
Real-Time PC Monitoring Yes
Log Report Management Real-Time recording and viewing via PC-Link
Log report .txt file can be generated via USB port and saved to USB device
Anti-Tampering Log Report Yes
Compatibility  
Operation system supported All (Windows, Linux, RAID, Other stand-alone systems)
HDD/SSD Compatible 1.8"/2.5"/3.5” SATA HDD and SSD
HDD/SSD Compatible (via adapter) 2.5", 3.5” IDE HDD, mSATA SSD, micro SATA, eSATA, iVDR
Support MBR, GPT Yes
Support Advanced Format HDD(15TB Above) Yes
Hardware Specification
Guiding Module Yes
Swappable Module Yes
Support Automatic power control Yes
Power Consumption 200W
Power Supply Adjustable Voltage 100V-240V, 50/60Hz.
Working Temperature 5°C ~ 45°C
Storage Temperature -20°C ~ 85°C
Working Humidity 20% ~ 80%
Storage Humidity 5% ~ 95%
Regulations FCC, CE, RoHS
* The actual specification may subject to change without notice.
TOP
 
  Copyright 2017 - Solstice Technologies - All Rights Reserved - We accept PayPal- Visa, MasterCard, Discover, American Express